Product Information
Hodapp's robust sliding elements are ideal for overhead conveyors and multiple conveyor lines and consist of a sandwich structure completely clad in sheet metal with fire protection panels for T90 fire resistance. They offer maximum flexibility with the option of closing either from right to left or from left to right. With a door leaf thickness of 64 mm and motorized reopening, they are perfect for wall installation.
fire resistance T90
| Wall opening Width: |
200 - 3.600 |
| Height: | 200 - 3.400 |
| General building approval: | Z- 6.6 -1993 |
| Fire resistance DIN 4102-5: | T90 |
| Closing directions: |  |
| Version: | • Slide blade optionally with or without steel sheetcladding (t = 1,0 mm) • Floor level or elevated installation position possible • Separate and continuous conveyor technology possible |
The FAA lifting elements from Hodapp are single or double-leaf, vertically closing fire protection closures for rail-bound conveyor systems. They are made of fire protection panels and galvanized steel or stainless steel and meet the DIN 4102 T5/T5 classification. In the event of a fire, the lifting elements close from top to bottom and prevent the fire from spreading via the conveyor system.
fire resistance EI2120
| Wall opening Width: |
400 - 6.900 |
| Height: | 400 - 5.700 |
| General building approval: | ETA-22/0585 |
| Fire resistance DIN 4102-5 / EN 1366-7: | EI2120 |
| Closing directions: |  |
| Version: | • Slide blade with sheet steel cladding • Slide blade can be made in segmental design • Floor level or elevated installation position possible • Separate and continuous conveyor technology possible |
Surfaces
Depending on the door element, different surfaces are possible.
FAA-S | FAA-H | FAA-D | FAA-B
surface without cladding
FAA-S | FAA-H | FAA-D | FAA-B
surface with cladding
FAA-ST | FAA-HT
